Power Supply Digital DC 0-60VDC Manufacturer,Supplier and Exporter in India
 (1).png)
Product Code : SCL-PLE-11778
The Power Supply Digital DC 0-60VDC by Scientifc Equipment is a laboratory-grade digital DC power supply designed to provide adjustable direct current voltage for electronics experiments, physics practicals, circuit testing, electrical training, and STEM laboratory activities. It is suitable for school laboratories, college electronics labs, research training rooms, engineering workshops, and educational institutions.
This digital DC power supply helps students and instructors safely perform experiments requiring controlled DC voltage output. With an adjustable voltage range up to 60VDC, digital display, output terminals, and regulated DC supply operation, it supports practical learning of electrical circuits, Ohm’s law, resistors, LEDs, motors, sensors, electromagnets, and electronic components.
Product Description
A Digital DC Power Supply 0-60VDC is commonly used for powering and testing low-voltage electronic circuits, physics apparatus, electrical components, and laboratory training modules. It allows users to adjust the voltage output according to experiment requirements and observe electrical behavior under controlled conditions.
The Scientifc Equipment Power Supply Digital DC 0-60VDC may include a digital voltage display, current display, voltage adjustment knob, current limit control, output terminals, overload protection, short-circuit protection, fuse protection, and sturdy laboratory cabinet depending on product configuration. It is designed for supervised educational and laboratory use only.
Key Features
- Digital DC power supply with adjustable voltage output up to 0-60VDC.
- Suitable for electronics, physics, electrical, and STEM laboratory experiments.
- Digital display helps users monitor voltage and current readings clearly.
- Useful for powering circuits, LEDs, motors, relays, sensors, and training modules.
- May include voltage adjustment, current control, and output protection depending on model configuration.
- Supports controlled DC experiments for schools, colleges, and technical institutes.
- Sturdy laboratory design for repeated classroom and practical use.
- Helps demonstrate Ohm’s law, circuit testing, resistance, current flow, and electrical safety.
- Designed for supervised educational and laboratory applications.
Product Specifications
|
Product Name |
Power Supply Digital DC 0-60VDC |
|
Brand |
Scientifc Equipment |
|
Product Type |
Digital Laboratory DC Power Supply |
|
Application |
Electronics Experiments, Physics Practical, Circuit Testing, Electrical Training, STEM Learning, Component Testing, and Laboratory Demonstration |
|
Output Voltage Range |
0-60VDC Adjustable Output |
|
Output Type |
Regulated DC Output |
|
Display Type |
Digital Voltage and Current Display Depending on Product Configuration |
|
Possible Controls |
Voltage Adjustment Knob, Current Control, Output Switch, Fine Adjustment, and Protection Reset Depending on Model Design |
|
Possible Protection Features |
Overload Protection, Short-Circuit Protection, Fuse Protection, Current Limiting, and Thermal Protection Depending on Product Configuration |
|
Possible Components |
Digital Meter, Output Terminals, Control Knobs, Power Switch, Internal Transformer or SMPS Circuit, Fuse, Cabinet, and Connecting Accessories Depending on Model |
|
Possible Material |
Metal or ABS Cabinet, Insulated Terminals, Electronic Control Board, Digital Display Panel, and Laboratory-Grade Electrical Components |
|
Compatible Accessories |
Connecting Leads, Banana Plugs, Multimeter, Breadboard, Circuit Training Kit, Motors, LEDs, Resistors, Sensors, and Physics Apparatus |
|
Educational Use |
Electronics Practical, Electrical Circuit Study, Ohm’s Law Experiment, Component Testing, Motor Testing, and STEM Laboratory Activity |
|
Suitable For |
Schools, Colleges, Engineering Labs, Technical Institutes, Physics Laboratories, Electronics Workshops, STEM Labs, and Educational Institutions |
|
Learning Topics |
DC Voltage, Current, Resistance, Ohm’s Law, Circuit Testing, Power Supply Regulation, Electrical Safety, Electronic Components, and Basic Electronics |
|
Operation |
Manual Voltage Adjustment, Controlled DC Output, Circuit Connection, Digital Reading Observation, and Laboratory Use Under Supervision |
|
Important Note |
For Educational and Laboratory Use Only; Current Rating, Display Accuracy, Protection Features, Input Voltage, and Accessories Depend on Product Configuration |
How to Use
- Place the Digital DC Power Supply on a stable, dry, and well-ventilated laboratory bench.
- Check that the power switch is OFF before connecting any circuit or load.
- Connect the power supply to the recommended input power source according to the product rating.
- Connect the positive and negative output terminals to the experiment circuit using suitable connecting leads.
- Set the voltage control knob to the minimum position before switching on the unit.
- Switch on the power supply and slowly increase the voltage to the required level.
- Observe the digital voltage and current readings during the experiment.
- Use current limiting or protection settings if provided with the model.
- Do not exceed the voltage and current rating of the connected component or circuit.
- After completing the experiment, reduce the voltage to zero and switch OFF the power supply.
- Disconnect the circuit and store the unit safely after use.
Safety and Handling Instructions
- Use only under teacher, laboratory instructor, or trained adult supervision.
- Do not operate the power supply with wet hands or near water.
- Do not exceed the rated voltage, current, or load capacity of the connected circuit.
- Always start with zero or minimum voltage before increasing the output.
- Do not short-circuit the output terminals intentionally unless the model supports protected testing under supervision.
- Use insulated connecting leads and check wires for damage before use.
- Keep the power supply in a well-ventilated area to prevent overheating.
- Do not open the cabinet while connected to power.
- Do not connect the DC output directly to mains electricity or unsuitable equipment.
- Switch OFF and unplug the unit before cleaning, moving, or storing.
- For any fault, burning smell, abnormal heat, or display issue, stop use immediately and consult a qualified technician.
Educational Applications
- Powering low-voltage DC electrical and electronic circuits.
- Teaching voltage, current, resistance, and Ohm’s law.
- Testing LEDs, resistors, motors, relays, sensors, and small circuit modules.
- Supporting physics experiments on electricity and magnetism.
- Providing controlled DC power for breadboard and electronics training kits.
- Helping students understand regulated power supply operation.
- Useful for circuit troubleshooting, component testing, and electrical demonstrations.
- Encouraging measurement, observation, safe connection practice, and technical learning.
Why Choose Scientifc Equipment Power Supply Digital DC 0-60VDC?
The Scientifc Equipment Power Supply Digital DC 0-60VDC provides a reliable and adjustable DC power source for educational laboratories and electronics learning. Its digital display and controlled voltage output help teachers and students perform circuit experiments safely, observe electrical readings clearly, and understand practical electrical principles with confidence.
FAQ
- What is the Power Supply Digital DC 0-60VDC used for?
It is used to provide adjustable DC voltage for electronics experiments, circuit testing, physics practicals, electrical training, and STEM laboratory activities.
- What is the voltage range of this power supply?
The voltage output range is 0-60VDC. The exact current rating, display accuracy, and protection features depend on product configuration.
- Is this power supply suitable for school laboratories?
Yes, it is suitable for school science labs, college electronics labs, physics laboratories, engineering workshops, and technical training institutes under supervision.
- Can it be used for breadboard circuit experiments?
Yes, it can be used for breadboard experiments and electronics training circuits when the voltage and current are set within the safe limits of the components.
- Does it have a digital display?
Yes, it is designed as a digital DC power supply and may include digital voltage and current display depending on product configuration.
- Can it protect circuits from overload?
Some configurations may include overload protection, short-circuit protection, fuse protection, current limiting, or thermal protection. Exact features depend on the model supplied.
- Can students operate this power supply independently?
Students should use the power supply only under teacher or laboratory instructor supervision after learning proper electrical safety and connection procedures.
- How should the power supply be stored?
Store the power supply in a clean, dry, and dust-free place. Keep it away from moisture, chemicals, direct heat, and rough handling.
SEO Keywords
Power Supply Digital DC 0-60VDC, Scientifc Equipment DC Power Supply, digital DC power supply, laboratory power supply, adjustable DC power supply, 0-60V DC power supply, school electronics lab power supply, physics lab power supply, regulated DC supply, electronics testing power supply, STEM lab power supply, circuit testing power supply.
SEO Meta Title
Power Supply Digital DC 0-60VDC – Scientifc Equipment
SEO Meta Description
Buy Power Supply Digital DC 0-60VDC by Scientifc Equipment for school electronics labs, physics practicals, circuit testing, STEM training, regulated DC experiments, and educational laboratory use.
Google E-E-A-T Focused Content
This product content is prepared to support teachers, school buyers, laboratory suppliers, electronics educators, physics instructors, STEM coordinators, technical trainers, students, and learning institutions with clear product information, practical specifications, usage guidance, safety instructions, and helpful FAQs. The content focuses on accurate educational laboratory applications, supervised electrical experimentation, safe DC power supply handling, circuit testing support, technical learning, and trustworthy product guidance while clearly stating that the product is for educational and laboratory use only.
.jpg)
.jpg)
.png)
.jpg)
 (1).png)
.jpg)